I’m a mechanical engineering student with a fairly open brief for a short project. Have to draw a 3D cad model of a mechanism and do some motion analysis. So i thought i’d ask the fine folk of slrpnk if they had any projects that need a bit of ironing out.
Probably best suited if you have an idea and want see how the parts might move in 3 dimensions. I’d be able to tell you stuff like how much force/torque is in a particular part, letting you know how strong bits need to be.
Has to be a mechanism of some sort that i draw from scratch - let me know what dimensions i need to accomodate. And i have to present it to the class.
So I’m not sure this would qualify, it may be too simple. I’d been thinking about trying to build a solar forge (I got to learn forging from a really good blacksmith who worked with coal for a couple years, though I am very much an amateur). I’ve seen videos of people using old fresnel lenses from rear projection TVs to burn through skillsaw blades and if you can melt steel, you can certainly forge it. It might just be slow, or too focused on one spot, requiring some movement to distribute the heat, something I’d have to mess with. It’d also be a bit of a safety hazard overall, but at least it’d be outside on a paved driveway instead of of inside a shed like my old coal forge.
I was picturing something similar to this smelter but with a reused TV lens, and a fire pot where his crucible is. The mechanical parts would be for rotating it to keep the sun shining through the lens, and possibly for adjusting the focus. Stability and safety would be a big consideration, don’t want the wind blowing it around too much.
Again, not sure if it’s what you’re looking for, but I’d like you to get some usable answers here. Best of luck with your project, thank you for reaching out to involve the community!
Very cool stuff. I might have to look a bit more into this. There’s a chap melting copper here with a 13 square foot lens - looks like a pretty small beam, not sure if usable for your purposes. But cool idea, have you got some lens dimensions in mind?
Also, definitely not guaranteeing any safety, but think i’ll give it a shot.
That’s great! I don’t have specific dimensions in mind (only because I haven’t sourced a lens yet). I’m not sure about the beam width. I think no matter what, it’ll be a narrower heat than you normally get with a coal fire or propane forge, so the blacksmith would probably have to adjust beam and shift the position of the piece to distribute the heat. But people make all kinds of things using little coffee can forges so if it allows for even that scale of project it’d be very useful.
It might not be a drop-in replacement for a traditional forge, but it could be a really cool way to preserve a lot of the practice without burning coal or gas. Let me know if I can help at all!
Sure, I’ll work off that copper coin lad’s dimensions and try and make it adjustable like the smelter. Could you point me towards an example of the little coffee can forge?