Faceman🇦🇺

you have been able to right click (or i guess two finger click for apple people) and open a second window forever.

You can have multiple finder windows in OSX, thats perfectly normal, but you cant have the network settings open next to the printer settings.

I’m pretty positive on mac OS, as an OS it’s technically quite good, but their preferences app has always been atrocious almost entirely for this reason, I want to have two preferences windows open to different pages please…

Thus why im moving to 11. Lots of the PCs I work with are still 10 though.

Mostly 11 now. I honestly prefer it to 10 now, but that’s with quite about of decrapification done to remove all of Microsoft’s bullshit.

At home I’m mostly using Ubuntu, but it’s basically covering firefox as all of my self-hosted stuff runs in thevbrowser and I don’t game much.

I hope your firewall is up to scratch.

honestly I still cant figure out how to configure a network interface properly without using the old control panel.

its been on the experimental branch for a while now

These are the people that complain to their ISP when their game ‘lags’ on their wireless connected computer several rooms away from the router.

can you run something like iperf3 or openspeedtest between the server and client to prove its a network throughput issue?

do you have a network switch you can add to avoid switching through your router (if it is indeed bad?)

Have you ensured you arent unknowingly using wifi at either end?

NGINX is a bit more hands on than some other options but it’s mature, configurable and there’s a huge amount of information out there for setting it up for various use cases.

in my case, its what I set up when i was first getting into this and it works, so I don’t want to go through setting up anything else.

Thanks for the insightful and helpful comment.

Unraid is great and I have been using it for over a decade now, but a paid OS on a 2bay nas seems excessive

I cant say I care as much as I used to, since encoding has gotten quite good, but I have also gotten better at seeing (aka. worse at being distracted by) compression artifacts so while I am less of a perfect remux rip supremacist, I’m also more sensitive to bad encodes so its a double edged sword.

I still seek out the highest quality versions of things that I personally care about, but I don’t seek those out for absolutely everything like I used to. I recently saved 12TB running a slight compression pass on my non-4k movie library, turning (for example) a 30gb 1080p Bluray Remux into a 20gb H265 high bitrate encode, which made more room for more full fat 4K bluray files for things I care about, and the few 1080p full remuxes I want to keep for rarities and things that arent as good from the 4k releases or the ones where the 4k release was drastically different (like the LOTR 4k’s having poor dynamic range and the colours being changed for the Matrix etc), which I may encode in the future to save more space again. I know I can compress an 80gb UHD bluray file down to 60gb with zero noticeable loss, thats as far as I need to go, I don’t need to go down to 10gigs like some release groups try to do, and at that level of compression you might as well be at 1080p.

I cant go as low as a low bitrate 720p movie these days as I’m very close to a large screen so they tend to look quite poor, soft edges, banded gradients, motion artifacts, poor sound etc. but if I were on a smaller screen or watching movies on a phone like I used to, I probably wouldn’t care as much.

Another side to my choice to compress is that I have about 10 active Plex clients at the moment and previously they were mostly getting transcoded feeds (mostly from remux sources) but now most of them are getting a better quality encode (slow CPU encode VS fast GPU stream) direct to their screens, so while I’ve compressed a decent chunk of the library, my clients are getting better quality feeds from it.

I use Plexamp for that, Jellyfin does it too. You can assign libraries per user quite easily.

So for 3 users you might have 4 libraries, one per user then a shared library they all have access to.

I have complete ROM sets for a couple of platforms in my archive, they’re available on SLSK but not a huge amount of bandwidth available.

Sad to see the old giants like Vimms finally being attacked after all these years.

One of my miniPCs is just a little N95 and it can easily transcode 4K HDR to 1080p (HDR or tonemapped SDR) to a couple of clients, and with excellent image quality. You could build a nice little server with a modern i3 and 16gigs of ram and it would smash through 4 or 5 high bitrate 4K HDR transcodes just fine.

Is that one transcoding client local to you? or are you trying to stream over the web? if it’s local, put some of the budget to a new player for that screen perhaps?

Gets even weirder when you see LGs webOS kinda started out as PalmOS

I have seen some talk over on XDA forums, but since there is more to an android TV than just the basic android OS, it’s a bit trickier without risking losing licences/compatibility/DRM/features.

Some older LG webOS tvs can be rooted and custom apps installed too such as ad free youtube players etc.

Not sure if there’s a list, but most Android based TVs can be cleaned and modded to some degree via ADB. If you can access the dev settings in android, chances are you can do a lot to make it better, strip out some google or branded packages, replace the launcher to block OS level ads etc. Projectivy usually works well since it supports input switching on many devices, but it’s still better to do all of this to a separate box and then plug it into a TV that is firewalled/filtered/offline. more control and less to fuck up.

Rooting and unlocking bootloaders is more complex as these android devices dont have normal recovery systems and require a lot of custom drivers to make the video and audio processing work, so it’s not worth going that far.