HDDs can be made tolerant to it. Constant rotation still puts significant extra strain on the bearings, when spinning however. The drive will likely fail faster than an SSD.

Your best bet might be to use a laptop as the basis. They are already designed with power efficiency in mind, and you won’t need an external screen and keyboard for local problem solving.

I would also consider having a raspberry pi 3 or similar as a companion. Services that must be up all the time run on the pi (e.g. network admin). The main computer only gets kicked out of sleep mode when required. The pi 3 needs less power than the newer pis, while still having enough computing power to not lag unless pushed hard.

I definitely agree with SSDs. HDDs don’t do well when rotated when running. Boats are less than a stable platform.

Screw thanking aliens, it’s an incredible team of engineers that have the skills and dedication to do what seems impossible. This was 100% humanity at its best.

They rebuilt the most critical core code on a near antique spacecraft that has effectively left the solar system over an equally ancient radio link. They had 1 shot, and nailed it.

A fair point, but ours is practically a bottle opener. A lot easier after a few previous bottles.

Can I point out the UK BS1363 (type G) plug is the only one you can use to open a bottle of beer.

I’m not sure what that says about the UK.

The ring main was the impetus for it. However it allows for safe down rating at the plug. My lamps don’t need 13A flex. If the only safety system is a 13A breaker, then you’re stuck with it, or risking a cable overload

We also have a highly developed sense of sarcasm. 😁

The fuse offers per device protection, as well as per room/area.

E.g. you have a lamp that draws 1A. It’s cable is rated for 3A. It has a malfunction and starts drawing 10A. This won’t pop a breaker, but will overload the cable. Eventually it could catch fire from overheating. If it has a 3A slow blow fuse, it will kill the fuse before it kills the cable.

It also helps to isolate problems rapidly to 1 device.

My phone autocorrect has been ducking annoying recently.

Thanks for the heads up.

The consensus in the trans community is to let a potential partner know earlier, rather than later. It avoids the situation you’ve encountered. Some men also can react violently, when they find out, so it’s quite a critical dilemma to them.

Unfortunately, not all follow that mindset. They also tend to bust out a lot, and so lead a lot of men on.

It’s a bit like the scumbag dilemma women face. Very few men are scumbags, yet women encounter them regularly when dating. Most men try not to annoy the women they find attractive. They are careful in their approach mentality. This means they only make a few approaches (relatively). They also tend to pair off, and so exit the pool. Scumbags cast a wide net, and don’t hang on to women for long. This means they make a LOT of approaches, and so annoy a vastly disproportionate number of women.

Basically most trans people try to be as polite and careful about it as possible. A few, unfortunately, can destroy the reputation of the rest by being scumbags about it, at least locally.

The reprap movement was exactly that. A self replicating rapid prototyper. While it never reached true replication, it got close enough to cause an explosive growth of the community. That, in turn led to the huge number of low cost suppliers and designs we have now.