Indeed, the article was written with Backblaze B2 as the S3-compatible storage used.
Indeed, the article was written with Backblaze B2 as the S3-compatible storage used.
Requires an iPhone 15 Pro or an iPad
Having a 3d printer is super convenient for any home or shop repairs I need to make. I have so many curtain spacers and custom hooks all over the place now. The key is to get some hours in Fusion or some other good CAD software so you can whip up custom parts in minutes. You may get it wrong the first few times, but a couple minutes of tweaks and then you have a new part printing while you go back to working on other stuff.
The Swedish Maker just put out a video about how transformative 3d printing has been for his workflow. https://youtu.be/p2bClWmKHRM
Not a lawyer, but there are lots of intricacies to this. You can own a trademark without having it be a registered trademark. Registration is expensive and then you are expected to actively defend use of your trademark. Be prepared to pay lawyers to send cease-and-desist letters to parties using your trademark for financial profit. Not to mention you have to be/become a business engaging in interstate commerce using this trademark.
https://www.uspto.gov/trademarks/basics/what-trademark
https://www.uspto.gov/trademarks/basics/how-much-does-it-cost
dedsec doesn’t appear to be a registered trademark in the US at this time.
https://tmsearch.uspto.gov/search/search-results
edit: added the word registered
Where is the carpentry shop?
They could be fined a small amount for cutting down the trees and then include a provision that the trees must be replaced with trees of the same size. If they were large trees, then that could get super expensive very quickly. There was a story about tree law on Reddit where someone cut down 32 trees on their neighbor’s property and were charged $1k each plus the cost of replanting, it ended up just shy of $2M.
Do you have an auxiliary power connector hooked up to the HBA? Here is the manual.
Awesome project!
It’s a shame that Mythbusters isn’t around to turn this into a shark week special. I’m pretty sure the myth would be busted and the only risk would be of the batteries catching fire after the shark bites one.
“A digital frontier.”
I buy samples from Atomic Filament when I don’t know which filament would work best for a project. They are 50g spools for under $4 each. It is usually enough filament to print out a filament sample card and a small test piece.
I would never use a printer without z-tilt adjust as well. The bed is trammed using motors automatically and then the bed mesh just accounts for surface flatness.
I appreciate the short review format and lack of pop-ups on the website.
Disappointing to hear that Bombrush Cyberfunk didn’t live up to the Jet Set Radio expectations. I used to play JSRF all the time on the OG Xbox.
In case anyone is curious, the printer in the picture is 1100x1100x820 mm and costs $50k USD.
https://builder3dprinters.com/us/product/builder-extreme-3000-pro/
RCS was a dumpster fire for years. Only in the past couple of years has Google stepped up to be the centralized force in making it work as envisioned.
quick edit to say I agree this could’ve been avoided if Apple had made iMessage for Android, but I just wanted to point out the blame is shared by poor implementation across the board.